set back!
Moderators: Dan J, Diesel Dave, Crazymanneil, Stuart
-
- I luv the smell of Diesel...
- Posts: 84
- Joined: Fri Jun 26, 2009 7:21 pm
- Location: Rotherham, south yorkshire, ENGLAND.
set back!
I spent all the winter months building my bike up for the summer when last week whilst going through a set of lights some twat t-boned me , mainly cosmetic damage, the folks are bent, tank split etc, but i have been lucky very very lucky. soon as all the aches have stopped and the swelling gone down its back into the garage, at least its not freezing cold
- andrewaust
- Site Admin
- Posts: 719
- Joined: Mon Dec 04, 2006 12:24 pm
- Location: Australia
- Contact:
Re: set back!
Sorry to hear that mate, hope them physical aches and pains go away real soon.
It's not a nice thing to get hit, some dic*head hit me head on back in 97 when I was a young fella, which relayed via a Police mate should have been a fatal, the near misses since then has made me wonder if I should be riding at all. At least the bike can be repaired/replaced - you cannot, so thank goodness your OK.
A
It's not a nice thing to get hit, some dic*head hit me head on back in 97 when I was a young fella, which relayed via a Police mate should have been a fatal, the near misses since then has made me wonder if I should be riding at all. At least the bike can be repaired/replaced - you cannot, so thank goodness your OK.
A
-
- I luv the smell of Diesel...
- Posts: 976
- Joined: Sun Dec 30, 2007 7:45 pm
- Location: Leiden, Holland
- Contact:
Re: set back!
Spring is always a dangerous time. 4-wheeled motorists not anticipating bikes is unfortunately a recurring phenomenon. I almost got hit myself by one, that returned to the right lane after overtaking a truck, while I just got on the highway. Best of luck recovering.
'92 Enfield + Hatz 1B40: street legal, weld up stainless exhaust, check engine rpm and change final drive sprocket.
- coachgeo
- I luv the smell of Diesel...
- Posts: 2002
- Joined: Sun Feb 22, 2009 6:00 am
- Location: USA Ohio, Above Cincinnati, Close to Dayton
Re: set back!
while its new technology..... it cant hurt... get an airbag jacket. A good amount of safety is gained. Granted wont help in the instances described here... but will in the get off kinds.
Re: set back!
Buckles - main thing is you're in one piece though really sorry to hear about the bike. At least you know exactly how it all goes together this time to be able to get it sorted.
If I had my way everyone would have to ride a bike for 12 months before being allowed to drive a car - that'd improve both driving standards and the understanding that not everyone is in some great tin box that protects them from idiocy!
Good luck getting it all fixed back up again.
If I had my way everyone would have to ride a bike for 12 months before being allowed to drive a car - that'd improve both driving standards and the understanding that not everyone is in some great tin box that protects them from idiocy!
Good luck getting it all fixed back up again.
1990 Honda NTV600 Revere
-
- I luv the smell of Diesel...
- Posts: 976
- Joined: Sun Dec 30, 2007 7:45 pm
- Location: Leiden, Holland
- Contact:
Re: set back!
Ouch, that looks really nasty. Props for the build quality though, you owned that fence
'92 Enfield + Hatz 1B40: street legal, weld up stainless exhaust, check engine rpm and change final drive sprocket.
-
- I luv the smell of Diesel...
- Posts: 84
- Joined: Fri Jun 26, 2009 7:21 pm
- Location: Rotherham, south yorkshire, ENGLAND.
Re: set back!
Righto, got stuck to my outfit over the last few weeks and its now ready for paint, an then started to paint, just a few bits left to blow over and start to rebuild,,,,,,,,,again, points scored if you lot can tell what I've altered
-
- I luv the smell of Diesel...
- Posts: 212
- Joined: Sat Aug 01, 2009 2:23 pm
- Location: northwest of Calgary, Alberta, Canada
Re: set back!
Well for starters the sidecar is on the opposite side. Unless you just reversed an image. Nice work to fix a frustrating situation.
Phil
Phil
-
- I luv the smell of Diesel...
- Posts: 212
- Joined: Sat Aug 01, 2009 2:23 pm
- Location: northwest of Calgary, Alberta, Canada
Re: set back!
Nope, no image manipulation either...I can see the turbo in the pics.
Phil
Phil
-
- I luv the smell of Diesel...
- Posts: 84
- Joined: Fri Jun 26, 2009 7:21 pm
- Location: Rotherham, south yorkshire, ENGLAND.
Re: set back!
top marks phil.
Re: set back!
Great news Buckles - the bike looks marvellous. Will we be seeing at the 2010 rally?
1990 Honda NTV600 Revere
-
- I luv the smell of Diesel...
- Posts: 84
- Joined: Fri Jun 26, 2009 7:21 pm
- Location: Rotherham, south yorkshire, ENGLAND.
Re: set back!
For the last few weekends I have been squirreling away in my garage and finally got the outfit through the MOT . I still have loads of work to finish off, but I'm so chuffed to be back on the road, when i smashed it up earlier this year i almost threw the towel in but riding it this weekends has made up for all hard work.
-
- I luv the smell of Diesel...
- Posts: 976
- Joined: Sun Dec 30, 2007 7:45 pm
- Location: Leiden, Holland
- Contact:
Re: set back!
Awesome news! More pics to top it off
'92 Enfield + Hatz 1B40: street legal, weld up stainless exhaust, check engine rpm and change final drive sprocket.
-
- I luv the smell of Diesel...
- Posts: 141
- Joined: Tue Feb 12, 2008 10:43 pm
Re: set back!
Hi Buckles,
Good luck with the bike, throw some holy water on it and make a few incantations and get on the road again. By the way I,ve been pushing my diahatsu turbo dnepr pretty hard lately and managed to burst the rubber driveshaft donut. The outer metal ring tore apart and the whole lot disintegrated, I'm not sure it's quite up to the turbo power. If you'r going long distance you might want to carry a spare. Expensive from U2 cycles but cheap from ukraine but left waiting. I'm going carry a Ukranian spare.
John.
Good luck with the bike, throw some holy water on it and make a few incantations and get on the road again. By the way I,ve been pushing my diahatsu turbo dnepr pretty hard lately and managed to burst the rubber driveshaft donut. The outer metal ring tore apart and the whole lot disintegrated, I'm not sure it's quite up to the turbo power. If you'r going long distance you might want to carry a spare. Expensive from U2 cycles but cheap from ukraine but left waiting. I'm going carry a Ukranian spare.
John.
-
- I luv the smell of Diesel...
- Posts: 84
- Joined: Fri Jun 26, 2009 7:21 pm
- Location: Rotherham, south yorkshire, ENGLAND.
Re: set back!
Hi Sphere,Sphere wrote:Awesome news! More pics to top it off
Will post some pictures at the weekend, am working just outside LONDON all week .
-
- I luv the smell of Diesel...
- Posts: 84
- Joined: Fri Jun 26, 2009 7:21 pm
- Location: Rotherham, south yorkshire, ENGLAND.
Re: set back!
Hi John, I may have a spare elastic band if you want it, I ditched all the Ural trans/drive for BMW, I would really like to go to HAMM this year, this job I'm on should be finished by the the first week in September so provided I can keep away from the boozer at weekends and and complete the outfit I'll be going . Do you buy spares from oldtimer, or ural zentrum? Andy.johnfireball wrote:Hi Buckles,
Good luck with the bike, throw some holy water on it and make a few incantations and get on the road again. By the way I,ve been pushing my diahatsu turbo dnepr pretty hard lately and managed to burst the rubber driveshaft donut. The outer metal ring tore apart and the whole lot disintegrated, I'm not sure it's quite up to the turbo power. If you'r going long distance you might want to carry a spare. Expensive from U2 cycles but cheap from ukraine but left waiting. I'm going carry a Ukranian spare.
John.
-
- I luv the smell of Diesel...
- Posts: 141
- Joined: Tue Feb 12, 2008 10:43 pm
Re: set back!
Hi Buckles,
Oldtimer sells quality parts but at a price, I got my final drive gears from him and have no regrets (much better quality than Ural Zentrale). Ural Zentrale are good and have given me good service for non critical components(shims etcthat the others dont list),but postage is expensive. I have got parts from Arbalest(ebay) but dont be in a hurry(2-3 months) not her fault I think its customs, there is a language barrier so only order what she advertises or you WILL get the wrong part(I have 2 center stands and brake light switches and god knows what else. Don't be tempted to deal with Dneprworld (Uri) in US as he will take your money and you will recieve nothing (did me for €200.00 bastad). In conclusion I can honestly say that my bike is the most satisfying I've ever ridden, attracts crowds with millions of questions and makes a great day out. I got a new donut from U2 (approx £50 oouch) If you have a spare I'de gladly take it off you and pay postage etc to Dublin.
John
Oldtimer sells quality parts but at a price, I got my final drive gears from him and have no regrets (much better quality than Ural Zentrale). Ural Zentrale are good and have given me good service for non critical components(shims etcthat the others dont list),but postage is expensive. I have got parts from Arbalest(ebay) but dont be in a hurry(2-3 months) not her fault I think its customs, there is a language barrier so only order what she advertises or you WILL get the wrong part(I have 2 center stands and brake light switches and god knows what else. Don't be tempted to deal with Dneprworld (Uri) in US as he will take your money and you will recieve nothing (did me for €200.00 bastad). In conclusion I can honestly say that my bike is the most satisfying I've ever ridden, attracts crowds with millions of questions and makes a great day out. I got a new donut from U2 (approx £50 oouch) If you have a spare I'de gladly take it off you and pay postage etc to Dublin.
John
-
- I luv the smell of Diesel...
- Posts: 141
- Joined: Tue Feb 12, 2008 10:43 pm
Re: set back!
Hi Buckles,
Sorry to but in again but I notice you are using the drum brake on the front,eeeh its not good enough to stop this rig especially in the rain. I posted a simple disc brake conversion in the brakes section and think you should seriously consider something similar, makes riding in modern traffic at decent speeds safe (you will find out when you have the white knuckle experience). Happy Piloting
John
Sorry to but in again but I notice you are using the drum brake on the front,eeeh its not good enough to stop this rig especially in the rain. I posted a simple disc brake conversion in the brakes section and think you should seriously consider something similar, makes riding in modern traffic at decent speeds safe (you will find out when you have the white knuckle experience). Happy Piloting
John
-
- I luv the smell of Diesel...
- Posts: 84
- Joined: Fri Jun 26, 2009 7:21 pm
- Location: Rotherham, south yorkshire, ENGLAND.
Re: set back!
Hi John, I was talking to a friend the other day who asked if I was going to upgrade the front brake, I told him if I did I would ride it faster so whats the piont :shock, I know what you mean tho it is proper dodgy. I will have a look for the elastic band drive when I get home. Andy.johnfireball wrote:Hi Buckles,
Sorry to but in again but I notice you are using the drum brake on the front,eeeh its not good enough to stop this rig especially in the rain. I posted a simple disc brake conversion in the brakes section and think you should seriously consider something similar, makes riding in modern traffic at decent speeds safe (you will find out when you have the white knuckle experience). Happy Piloting
John
-
- I luv the smell of Diesel...
- Posts: 84
- Joined: Fri Jun 26, 2009 7:21 pm
- Location: Rotherham, south yorkshire, ENGLAND.
Re: set back!
Hi John, found a couple of cush drives, one's off my bike an looks ok, the others off a basket case, there are cuts in it but only on the surface. £20 the pair, plus postage, they weigh about three kilo's. Cheers Andy.johnfireball wrote:Hi Buckles,
Good luck with the bike, throw some holy water on it and make a few incantations and get on the road again. By the way I,ve been pushing my diahatsu turbo dnepr pretty hard lately and managed to burst the rubber driveshaft donut. The outer metal ring tore apart and the whole lot disintegrated, I'm not sure it's quite up to the turbo power. If you'r going long distance you might want to carry a spare. Expensive from U2 cycles but cheap from ukraine but left waiting. I'm going carry a Ukranian spare.
John.
-
- I luv the smell of Diesel...
- Posts: 141
- Joined: Tue Feb 12, 2008 10:43 pm
Re: set back!
Hi Buckles,
If you have a paypal a/c I will send the money on. If postage is expensive just send the good un.
Many Thanks John.
Address: John Dunne
38 The Avenue,
Cypress Downs,
Templeogue,
Dublin 6w
Ireland
If you have a paypal a/c I will send the money on. If postage is expensive just send the good un.
Many Thanks John.
Address: John Dunne
38 The Avenue,
Cypress Downs,
Templeogue,
Dublin 6w
Ireland
-
- I luv the smell of Diesel...
- Posts: 84
- Joined: Fri Jun 26, 2009 7:21 pm
- Location: Rotherham, south yorkshire, ENGLAND.
Re: set back!
Hi John, I will try and get you a price for postage soon as, i've been soooooo busy at work and also trying to get the outfit ready for Hamm. Sorry for the wait, Andy.
-
- I luv the smell of Diesel...
- Posts: 84
- Joined: Fri Jun 26, 2009 7:21 pm
- Location: Rotherham, south yorkshire, ENGLAND.
Re: set back!
Hi John, price for post to you is, £5.94, insured up to £41. £10.84, air save fully tracked, one cush drive works out a couple of quid cheaper in both options. If you want one of both I will try to catch the post before I set off for Hamm.buckles wrote:Hi John, I will try and get you a price for postage soon as, i've been soooooo busy at work and also trying to get the outfit ready for Hamm. Sorry for the wait, Andy.
-
- I luv the smell of Diesel...
- Posts: 141
- Joined: Tue Feb 12, 2008 10:43 pm
Re: set back!
Hi Andy,
Are you going to make Hamm! Thanks for the package, arrived this morning.
I can pay you by Paypal if you give me an email account, I know they charge so add it to the cost. If you give me a total and address I'll pay immediatly. Or if you want a bank draft Give me total and postal address.
Many thanks again and enjoy Hamm (wish I could go).
Regards John.
Are you going to make Hamm! Thanks for the package, arrived this morning.
I can pay you by Paypal if you give me an email account, I know they charge so add it to the cost. If you give me a total and address I'll pay immediatly. Or if you want a bank draft Give me total and postal address.
Many thanks again and enjoy Hamm (wish I could go).
Regards John.
-
- I luv the smell of Diesel...
- Posts: 84
- Joined: Fri Jun 26, 2009 7:21 pm
- Location: Rotherham, south yorkshire, ENGLAND.
Re: set back!
Hi John, glad you got the spares through and I hope they are of use to you, call it 20 quid,I can't arsed with the pay pal stuff so how about giving it to the air ambulance charity. . Andy