how in the hell am I going to get the engine in that frame

Bodywork, Engine Mounting, Frames, Sub Frames, Forks, Suspension etc..

Moderators: Dan J, Diesel Dave, Crazymanneil, Stuart

Post Reply
User avatar
coachgeo
I luv the smell of Diesel...
Posts: 2002
Joined: Sun Feb 22, 2009 6:00 am
Location: USA Ohio, Above Cincinnati, Close to Dayton

how in the hell am I going to get the engine in that frame

Post by coachgeo »

So how in the hell am I going to get the engine in that frame

Need ideas and inspiration; see ( http://advrider.com/forums/forumdisplay.php?f=83 )

Just thumb thru it for ideas and techniques used in bike builds there. Course you should do that here too. Some great build reports here that could inspire you.
User avatar
coachgeo
I luv the smell of Diesel...
Posts: 2002
Joined: Sun Feb 22, 2009 6:00 am
Location: USA Ohio, Above Cincinnati, Close to Dayton

Re: how in the hell am I going to get the engine in that frame

Post by coachgeo »

Two builds in one thread with frame mods.

http://advrider.com/forums/showthread.php?t=797568
jimmy62alan
I'm pretty new here..
Posts: 9
Joined: Wed Dec 11, 2013 2:25 pm
Location: Sheffield S25 2RN

Re: how in the hell am I going to get the engine in that frame

Post by jimmy62alan »

If you get the cross bar hinged so it will lift up or out and after the engine is fitted in place put the cross bar back in place and bolt it in, if I had a scanner I would draw a sketch and scan it in to show you how its done.
ALAN
Sheffield S25 2RN
Eddy Wane
I luv the smell of Diesel...
Posts: 137
Joined: Mon Aug 05, 2013 7:26 pm
Location: Crossens, Southport, UK.

Re: how in the hell am I going to get the engine in that frame

Post by Eddy Wane »

Alan.

Couldn't resist it.

If I had a scanner I'd scan in the morming
I'd scan in the evening
All over the world.

I'd scan out methods
I'd scan out drawings
I'd scan the pics you need to but the bike together
All, all over the world.

(Come on everybody sing along).

Apologies to Pete Seegar and Peter, Paul and Mary.

Merry Christmas.
Eddy.
Building the bike. Top of my list, bottom of the wife's.
jimmy62alan
I'm pretty new here..
Posts: 9
Joined: Wed Dec 11, 2013 2:25 pm
Location: Sheffield S25 2RN

Re: how in the hell am I going to get the engine in that frame

Post by jimmy62alan »

lmfao hahahaha
ALAN
Post Reply