Hallo out there
My name is Anders Bruun, and I am mechanical engineer.
In my education 10 years ago I converted a BMW R65 to diesel. I have seen some one ask for this in this side: "Private Development of Diesel Motorcycles by engine"
We got a motor from the danish military and messured everything and made a 3D computer model with a lot of calculations. Unfortunately, the whole project is only at computer and paper, so nothing was ever build or tested. This project is in danish only.
Now I want to build a Dnepr MT16 2WD with a Hatz or a Punsun diesel.
Current (petrol) bikes:
Nimbus 1950 (danish motorbike)
KTM 625 offroader
regards
Anders Bruun
Hallo from Denmark
Moderators: Dan J, Diesel Dave, Crazymanneil, Stuart
-
coachgeo
- I luv the smell of Diesel...
- Posts: 2002
- Joined: Sun Feb 22, 2009 6:00 am
- Location: USA Ohio, Above Cincinnati, Close to Dayton
Re: Hallo from Denmark
Welcome to the board. Lot of Dneper conversions in these pages. Search Dneper.
Look forward to seeing your bike being built.
Look forward to seeing your bike being built.
-
Stuart
- Site Admin
- Posts: 2221
- Joined: Fri Dec 01, 2006 9:08 pm
- Location: Horsham West Sussex, England
- Contact:
Re: Hallo from Denmark
Welcome Bruun 
If you ever create a set of plans for your project it would be good to share 
If you ever create a set of plans for your project it would be good to share Stuart. M1030M1, Honda NC700S, Grom!, Toyota Corolla 1.4 Turbo Diesel. Favouring MPG over MPH.