hi guys
after much work i am finaly ready with that projekt.
is an 505ccm lombardini diesel. top speed is 100kmh.
the finalydrive is 10/35.
look pictures.
heiko
http://666kb.com/i/baryt0a2uq9w2apox.jpg
http://666kb.com/i/baryviip61zsi121d.jpg
m72 diesel is ready
Moderators: Dan J, Diesel Dave, Crazymanneil, Stuart
- andrewaust
- Site Admin
- Posts: 719
- Joined: Mon Dec 04, 2006 12:24 pm
- Location: Australia
- Contact:
Re: m72 diesel is ready
Excellent Heiko! Job well done
That looks like a really good mate up of the gearbox and engine. What sort of RPM"s do you think your doing at 100Khr, interested to know how the gearing is on these bikes.
Cheers
Andrew
That looks like a really good mate up of the gearbox and engine. What sort of RPM"s do you think your doing at 100Khr, interested to know how the gearing is on these bikes.
Cheers
Andrew
- Stuart
- Site Admin
- Posts: 2221
- Joined: Fri Dec 01, 2006 9:08 pm
- Location: Horsham West Sussex, England
- Contact:
Re: m72 diesel is ready
Good Job Heiko I love those older shaft drives on these bikes - kinda give it the minimalist look which I like
Stuart. M1030M1, Honda NC700S, Grom!, Toyota Corolla 1.4 Turbo Diesel. Favouring MPG over MPH.
- Crazymanneil
- Site Admin
- Posts: 566
- Joined: Sat Dec 02, 2006 10:10 pm
- Location: Bangor, Northern Ireland
- Contact:
Re: m72 diesel is ready
Another lovely bike Heiko!
N
N
Smart engined 800cc turbo diesel triumph tiger. 100mpg (imp)
Belfast to Kathmandu overland, 2010/2011 - http://www.suckindiesel.com
Bangkok to Sydney ???
Belfast to Kathmandu overland, 2010/2011 - http://www.suckindiesel.com
Bangkok to Sydney ???
Re: m72 diesel is ready
thanks all
i messure at 3600upm the spin of back wheel.
with calculation it was 97,5kmh.
on frame i dont weeld anything. only bending.
but in front of engine i made a lot of staff.
i messure at 3600upm the spin of back wheel.
with calculation it was 97,5kmh.
on frame i dont weeld anything. only bending.
but in front of engine i made a lot of staff.
Re: m72 diesel is ready
Hallo Heiko,
Do you think this also is possible with a china engine? or are these to large..
Is the m72 frame longer/better then a later ural or dnepr frame?
I hope the bending won't give any ruptures..
Take it to Hamm! i'd loveto see it for real!
Do you think this also is possible with a china engine? or are these to large..
Is the m72 frame longer/better then a later ural or dnepr frame?
I hope the bending won't give any ruptures..
Take it to Hamm! i'd loveto see it for real!