Other stators

Wiring, Switches, Alternators, Regulators, etc..

Moderators: Dan J, Diesel Dave, Crazymanneil, Stuart

Post Reply
alexanderfoti
Site Admin
Posts: 1290
Joined: Fri Jul 15, 2011 4:22 pm
Location: London

Other stators

Post by alexanderfoti »

Hi all

I have attempted to rewind my stator, but after 3 turns on each pole of a 15 amp yanmar, I only managed to get 5 volts at 3000rpm, im sure my crappy winding has failed somehwere,

So I have 2 options .

1) pay somebody LOTS of money to rewind if for me.

2) figure out another motorbike stator that fits the yanmar.

So any ideas?
User avatar
henneberg
I luv the smell of Diesel...
Posts: 130
Joined: Tue Aug 02, 2011 2:26 pm
Location: Denmark
Contact:

Re: Other stators

Post by henneberg »

I have got the same experience as you ! My Yanmar L100 had the 1A dynamo version, and then I bought a chinese "15 A" dynamo assembly, I did the rewinding of the stator. But after a while my rewinded chinese stator with chinese magnet wheel gave approx. 10 V AC at 3000 rpm. It should output at least 30 V AC unloaded at 3000 rpm.

Yanmar has produced at least 3 different versions of "Dynamo assy" ( stator and magnetwheel in pairs ), 1A, 3A and 15A . I found an original NOS 1992 "Dynamo assy" 12V / 15A Yanmar sparepart no. 114351-78290.

Finally, with the original Yanmar "Dynamo assy"-114351-78290 and the Yamaha XTZ 600, 34L regulator I am using, it starts charging the battery at 1500 rpm with all lights on.
Last edited by henneberg on Tue Jun 05, 2012 4:19 pm, edited 1 time in total.
Image
---------------
Enfield Ruggerini MD151 654cc build - running: http://www.youtube.com/watch?v=b4UsIn5QLxk
alexanderfoti
Site Admin
Posts: 1290
Joined: Fri Jul 15, 2011 4:22 pm
Location: London

Re: Other stators

Post by alexanderfoti »

Aha, that might explain why, as I didn't get a different set of magnets with my 15amp stator!

Thats pretty good, as mine stops the battery discharging at 3000rpm with the 3amp stator with the lights on.

I was thinking of putting a chainwheel on a suzuki gsx alternator and mounting that somwhere in my primary, any thoughts on that?
alexanderfoti
Site Admin
Posts: 1290
Joined: Fri Jul 15, 2011 4:22 pm
Location: London

Re: Other stators

Post by alexanderfoti »

Looking up the part number. I can only find one place, and its 200+ vat :(
alexanderfoti
Site Admin
Posts: 1290
Joined: Fri Jul 15, 2011 4:22 pm
Location: London

Re: Other stators

Post by alexanderfoti »

User avatar
henneberg
I luv the smell of Diesel...
Posts: 130
Joined: Tue Aug 02, 2011 2:26 pm
Location: Denmark
Contact:

Re: Other stators

Post by henneberg »

No, it is a chinese dynamo assembly, the stator wire is too thin to provide 15A !.

I got the original Yanmar from the danish Yanmar import.
Image
---------------
Enfield Ruggerini MD151 654cc build - running: http://www.youtube.com/watch?v=b4UsIn5QLxk
alexanderfoti
Site Admin
Posts: 1290
Joined: Fri Jul 15, 2011 4:22 pm
Location: London

Re: Other stators

Post by alexanderfoti »

Aha, how much did you pay?
pietenpol2002
I luv the smell of Diesel...
Posts: 778
Joined: Wed Dec 05, 2007 6:56 pm
Location: Goshen, IN USA

Re: Other stators

Post by pietenpol2002 »

There's this interesting application of a Vulcan stator in the thread below (down the page a bit). But, since he's not using the original flywheel I don't know that it could be snuggled in under a stock flywheel. Still, I've wondered too whether there wouldn't be a stator assembly from another bike that could be adapted.

https://www.dieselbikeforum.com/view ... via#p12248
Ron
alexanderfoti
Site Admin
Posts: 1290
Joined: Fri Jul 15, 2011 4:22 pm
Location: London

Re: Other stators

Post by alexanderfoti »

Hmm I see what you mean, I wonder if we can find the measurements for the vulcan one, I should be able to figure out if it will fit or not.
Post Reply