Aixam 500 engine?

Engine's, injection, valve's, timing, crank's etc..

Moderators: Dan J, Diesel Dave, Crazymanneil, Stuart

Post Reply
Wrekin wanderer
I'm pretty new here..
Posts: 7
Joined: Sat Jan 13, 2007 11:48 pm
Location: Oxfordshire

Aixam 500 engine?

Post by Wrekin wanderer »

Hi there,

Have any of you come across this weird looking thing before?

http://uk.cars.yahoo.com/car-reviews/ca ... 02222.html

Uses a Kubota twin cylinder diesel engines on offer, which develop around 15 or 20bhp.

A useful engine for a project do you think?

Mike
sbrumby
I luv the smell of Diesel...
Posts: 517
Joined: Sun Dec 10, 2006 8:35 pm
Location: STAFFORDSHIRE ENGLAND

Post by sbrumby »

If you had come to the Bat & Ball you would have seen one in an Enfield.
Sam
User avatar
TimppaX
I luv the smell of Diesel...
Posts: 117
Joined: Mon Oct 01, 2007 7:48 am
Location: Finland
Contact:

Post by TimppaX »

And after simple parts removal Aixams will run over 100km/h. :shock: 80mph(?)

Covernor move is blocked with simple lever in order to keep it at legal speeds. Bolt it off and presto.

I had faint ideas of using engine+gearbox combination in my bike but importer didn´t want to sell me one, without chassis etc.

Now second project to be is to build trike for my Wife. She ordered one. But when... I´m looking after wrecked one with engine&gearbox combination still operating. Accidents do happen.
that should do it
Sphere
I luv the smell of Diesel...
Posts: 976
Joined: Sun Dec 30, 2007 7:45 pm
Location: Leiden, Holland
Contact:

Post by Sphere »

Well, I know of one in Holland, maybe you can take a holiday there, and bring a motor back home ;)

http://brommobielsloperij.nl/index.php? ... 2&Itemid=2
'92 Enfield + Hatz 1B40: street legal, weld up stainless exhaust, check engine rpm and change final drive sprocket.
Wrekin wanderer
I'm pretty new here..
Posts: 7
Joined: Sat Jan 13, 2007 11:48 pm
Location: Oxfordshire

Post by Wrekin wanderer »

Unluckily I couldn't make it to the Bat & Ball this year, again..... Better luck next year!

Did anyone catch what setup Steve from Somerset was running with the Kubota 500cc twin and it's performance figures?
dr pepper
I'm pretty new here..
Posts: 13
Joined: Thu Jun 26, 2008 3:49 pm

Post by dr pepper »

the aixam uses a kubota twin z600 series, and is a good motor, the box however is a constantly variable doodah and is prone to explode i believe.
would make a good donor for a bike, there are breakers that do reliants that also have aixam's, if your lucky you might get the sports version which is meant to be turbo'd.
Wrekin wanderer
I'm pretty new here..
Posts: 7
Joined: Sat Jan 13, 2007 11:48 pm
Location: Oxfordshire

Post by Wrekin wanderer »

Well picked up the engine at the weekend and looks good. Was surprised to find the box still attched. Added bonus if its a CVT, as was thinking of heading that way anyway after seeing Fiddler's creation, although not so good if it's prone to blow up! Any more details Dr.Pepper?

Shame it's not a turbo though - that would be quite a find...

Thanks for the advice Timppax, am tempted also to bore it out a little and skim off the head to boost the hp further.

Wahey! Off the starting blocks at last :lol:
fatboy
I don't post much...
Posts: 1
Joined: Wed Aug 13, 2008 6:27 pm

aixam build

Post by fatboy »

:D hi there wrekin,i was running one of these cars a little while ago,a great little motor,how they rekon on that report that the build quality is only one ad a half is beyond me,these little motors have a n-cap rating of five,the mpg on this car i managed to get 90 mpg out of it,the performance is a little slow,but saying that they dont hang around for a little twin,top speed i got out of it was 60 mph,not bad for a diesel shopping trolley,hope this info helps you out,i hope to have the car on the road soon,cheers,paul.
Sphere
I luv the smell of Diesel...
Posts: 976
Joined: Sun Dec 30, 2007 7:45 pm
Location: Leiden, Holland
Contact:

Re: Aixam 500 engine?

Post by Sphere »

Any updates on this? Or a pic of the Aixam Enfield pretty please? 8)
'92 Enfield + Hatz 1B40: street legal, weld up stainless exhaust, check engine rpm and change final drive sprocket.
buckles
I luv the smell of Diesel...
Posts: 84
Joined: Fri Jun 26, 2009 7:21 pm
Location: Rotherham, south yorkshire, ENGLAND.

Re: Aixam 500 engine?

Post by buckles »

look on R3W its the axiam and reliant owners club site.
Sphere
I luv the smell of Diesel...
Posts: 976
Joined: Sun Dec 30, 2007 7:45 pm
Location: Leiden, Holland
Contact:

Re: Aixam 500 engine?

Post by Sphere »

Didn't find the Enfield, but did find a hONDa instead 8)

http://www.r3w.co.uk/forum/showthread.php?t=10046
Attachments
diesel2.jpg
diesel.jpg
'92 Enfield + Hatz 1B40: street legal, weld up stainless exhaust, check engine rpm and change final drive sprocket.
User avatar
coachgeo
I luv the smell of Diesel...
Posts: 2002
Joined: Sun Feb 22, 2009 6:00 am
Location: USA Ohio, Above Cincinnati, Close to Dayton

Re: Aixam 500 engine?

Post by coachgeo »

buckles wrote:look on R3W its the axiam and reliant owners club site.
"R3W" ??? is that a dot ORG or dot COM orrr??
Sphere
I luv the smell of Diesel...
Posts: 976
Joined: Sun Dec 30, 2007 7:45 pm
Location: Leiden, Holland
Contact:

Re: Aixam 500 engine?

Post by Sphere »

co.uk, like in the link 8)
'92 Enfield + Hatz 1B40: street legal, weld up stainless exhaust, check engine rpm and change final drive sprocket.
User avatar
Stuart
Site Admin
Posts: 2221
Joined: Fri Dec 01, 2006 9:08 pm
Location: Horsham West Sussex, England
Contact:

Re: Aixam 500 engine?

Post by Stuart »

Good find Sphere :D A Daihatsu Honda from Holland I'm guessing :?: :D
Stuart. M1030M1, Honda NC700S, Grom!, Toyota Corolla 1.4 Turbo Diesel. Favouring MPG over MPH.
Sphere
I luv the smell of Diesel...
Posts: 976
Joined: Sun Dec 30, 2007 7:45 pm
Location: Leiden, Holland
Contact:

Re: Aixam 500 engine?

Post by Sphere »

The clogs are a tell-tale sign for sure Stu :mrgreen:
'92 Enfield + Hatz 1B40: street legal, weld up stainless exhaust, check engine rpm and change final drive sprocket.
lardy1
Been here a while now..
Posts: 38
Joined: Sun Nov 22, 2009 6:04 am
Location: camberley surrey

Re: Aixam 500 engine?

Post by lardy1 »

yep i had the loan of one of these a couple of years ago,great little car for the shopping trip,my mate bought it from guy in dartford,paid around 1,100 for it i think,£20 of diesel lasted about a month and a half,i was gettin 70 mpg out of it,wouldnt recommend dual carriageways,makes for scary driving,parts are reasonable and there are plenty of dealers,well worth a go,good luck.
Wrekin wanderer
I'm pretty new here..
Posts: 7
Joined: Sat Jan 13, 2007 11:48 pm
Location: Oxfordshire

Re: Aixam 500 engine?

Post by Wrekin wanderer »

Well, been away from here for a while, but as for the update on the enfield Kubota...

The engine is in the back of me van in Shropshire and I'm living in a yurt in someone's backgarden in Oxfordshire with the bike. So I haven't got very far! One day it will happen......
Sphere
I luv the smell of Diesel...
Posts: 976
Joined: Sun Dec 30, 2007 7:45 pm
Location: Leiden, Holland
Contact:

Re: Aixam 500 engine?

Post by Sphere »

Good luck in that tent. Not a good season to be camping.
Attachments
england_snow.jpg
'92 Enfield + Hatz 1B40: street legal, weld up stainless exhaust, check engine rpm and change final drive sprocket.
Post Reply