The biginning of the heap of crap

On-going, finished, abandoned builds & questions galore..

Moderators: Dan J, Diesel Dave, Crazymanneil, Stuart

User avatar
Stuart
Site Admin
Posts: 2175
Joined: Fri Dec 01, 2006 9:08 pm
Location: Horsham West Sussex, England
Contact:

Re: The biginning of the heap of crap

Post by Stuart » Thu Jun 27, 2019 2:17 pm

Nice to meet you :D

User avatar
the grinch
I luv the smell of Diesel...
Posts: 67
Joined: Wed Mar 23, 2016 5:29 pm
Location: Abingdon

Re: The biginning of the heap of crap

Post by the grinch » Sun Jul 07, 2019 10:36 am

Moving forward again.
Well I had to go away for a bit but I am now back working on the bike. I spent a few hours working out things and drawing up the part I needed making. I found a couple of places that would help me out. Unfortunately when they gave me the price I nearly passed out. So it was time to find another solution. I hadn’t given it much thought as my son needed help with the electric guitar he has been building for his college project. We needed some screws so I had a rummage at the back of the garage. I never did find the screws for him but I did find a bag with a pair of rear wheel bearings in for my wife’s car. So I looked them up to see what the dimensions are. The inner was 25mm now I had a bit of bar that was either 1” or 25mm so I thought this may be a plan. Well the bar fits the outer diameter is 52mm this is not as easy I would need a piece of 60mm with a thick wall to have it machined up to fit. I was determined though to avoid having anything made up. So far I have made everything for the bike with a hammer and grinder the welder and a big pillar drill. I searched everywhere and I just couldn’t find anything. I had an old jack in the shed I had not even thought about harvesting something from that. Well I measured the first shaft and it was just over 50mm. I thought that the next would be about 51mm with the clearance for the seals so it was time to make a sacrifice. Well talk about a stroke of luck the bearings are just the right fit in the tube. So next it was time to sort the hub face. A nice bit of 12mm plate will do. I forgot what it was like to get through it with a holesaw but slow and steady with a bit off cutting fluid and it was good. Now a holesaw is not precise it never will be so I had to start with a few mm smaller than I wanted to end up with. Everything else had to be marked up first. But I got it sorted out. And with the help of a pair of welding magnets and the dial test indicator I was off. I managed to get it just under 0.006 of a inch on the face it was tricky but i used the welder to pull it um i couldnt get it better than 0.020 to start with. It is as close as i can get it so i think that will have to do. I still have a few things to get sorted which I will need some parts. :D
Attachments
IMG_20190611_202539691_HDR.jpg

User avatar
the grinch
I luv the smell of Diesel...
Posts: 67
Joined: Wed Mar 23, 2016 5:29 pm
Location: Abingdon

Re: The biginning of the heap of crap

Post by the grinch » Mon Jul 22, 2019 4:56 pm

Getting a bit closer.
Well some bits came I got a bolt on flange bearing for the calliper carrier, short piece of precision tubing for my spacers and a few other bits and bobs. I set about making the next part. I got it all sorted out but I found that the pillow block had too much movement I think it would need to be used in a pair. I had to start that bit again I thought I would need to scrap everything but I found a glacier bush only a few quid. And I made a part for it and it worked out well I have not been able to check it yet as I have got to wait for my axle to be made I have made it a lot easier now I had a good think about it and found a way ahead using the parts that I have made. The bloke up the road is sorting it out for a good price. I have started making the master cylinder mount and the lever for operating it. :D
Attachments
IMG_20190710_171746454.jpg
IMG_20190710_171723320.jpg
IMG_20190705_120446972.jpg
IMG_20190705_120438082.jpg

User avatar
the grinch
I luv the smell of Diesel...
Posts: 67
Joined: Wed Mar 23, 2016 5:29 pm
Location: Abingdon

Re: The biginning of the heap of crap

Post by the grinch » Sun Jul 28, 2019 6:47 am

Rolling again
I have got the parts from the bloke at the engineering shop. Now its time to put it all together . Everything fits although I think I may be a little out on my measuring. I will get that sorted out after I have done the brakes and tested it out it is an easy fix. I have got a stay bar so it should make everything feel better when braking. I fitted another tyre as the sidewall was perished on the other but it is all good the suspension seems ok and I have got about 2 ½ inches of trail so it will hopefully be ok I was on about 3 inches before. I still have stuff to do but I am hoping to get everything sorted out by September. I need to get a few brake hoses I will make a bit for the tee connection and see how long they need to be.
Attachments
IMG_20190726_183830234.jpg
IMG_20190726_183808798.jpg
IMG_20190726_173444036.jpg

User avatar
the grinch
I luv the smell of Diesel...
Posts: 67
Joined: Wed Mar 23, 2016 5:29 pm
Location: Abingdon

Re: The biginning of the heap of crap

Post by the grinch » Mon Aug 12, 2019 12:20 pm

Last few bits
I have been off work and the kids are with the grandparents and wife has been working. What was I supposed to do with all that time? I have been doing 14hr days on the bike and it’s nearly finished. Well I had to wait for parts so I just started all the little jobs that get put off for later and a few upgrades. It became apparent that I could get it done. I had a few issues and some stupid things that I had overlooked. So I found out that the cheap Chinese speedo needed to beaten with a stick and the wiring instructions needed to be burnt before you opened the box turns out that if the magnets are not all the same polarity it will work until it can’t cope and then go back to nothing. I thought I was being smart I used 5 magnets as I thought it would be more accurate. It turned out I had 3 1 way and 2 the other. Well I can tell you that they don’t like the hammer and big screwdriver that I used to de-bond them from the wheel. I now have 1 magnet and I even had to turn that around. And now for the best bit :cry: . So MSVA I got the manual printed it off so I started with the bike all looking good I am hoping it will be ok. Now I checked the motorcycle and sidecar bits well I am a bit thick and I do have a job understanding things sometimes. So ok I think I have fucked up with the lighting. Now it may just be that I can’t get my head around the manual or I am just hoping that I am not reading it correctly. The manual states that the front and rear position lights the indicator and the stop lights need to be within 400mm of the outermost edge. WTF is the outermost edge my bloody handlebars are well over a meter wide or is it just the bodywork tank etc. if it is the handlebars that would mean that the side light and the tail light are too bloody far away and the indicators are maybe just about in. To make matters worse the bike has got 2 indicators and the sidecar has 1 that makes 3 now that also throws up a bloody problem. So I thought I would ring VOSA well the bloke on the phone could not help me. I did read the glossary of terms and couldn’t find the outermost edge but there was something similar that said mirrors and handles could be disregarded. I have sent an email it will probably take a few day or weeks depending on how busy they are. So the long and short of it are this week I will be getting it weighed and I will be getting a stamp on the form and I will be sending it ready for the next step MSVA. I have found some truck mirror lights that will do if I need to change everything. I will need to modify them but I can make it happen. :D :D :D

Post Reply